14 COUNTRIES · 4 CONTINENTS Start a project →
Home/Saudi Arabia/Structural Engineer in Jeddah
JEDDAH · SAUDI ARABIA · RED SEA

Structural Engineer in Jeddah

Sixteens Consultancy Services — remote structural engineering for Jeddah projects. Saudi Building Code (SBC), IBC, ASCE 7-22, ACI 318-19, AISC 360-22. Red Sea coastal towers, port-adjacent structures, Hajj/Umrah accommodation, and marine-exposure industrial. Senior engineer responds within one business day.

Remote Structural Engineering for Jeddah Projects

Sixteens Consultancy Services provides structural engineering services for Jeddah clients from our office in Kozhikode, Kerala, India. We have direct Saudi Building Code experience — our Dammam Entertainment Tower was designed under SBC + IBC, and the SBC framework applies identically in Jeddah. Remote structural engineering is standard practice: we deliver complete calculations and drawings, which your Jeddah-licensed consultant coordinates for Jeddah Municipality approval.

Jeddah's construction market is shaped by its Red Sea coastal position, its role as the gateway to the two Holy Mosques, and its ongoing transformation under Vision 2030 — the Jeddah Tower, the expanded King Abdulaziz International Airport, and the Jeddah Corniche development are among the most demanding structural engineering projects currently active in the region.

Serving Jeddah & Saudi Arabia Remotely
Sixteens Consultancy Services
Office no. 13, 2nd Floor, Landmark Meritus Commercial Building
Thiruvannur, Kozhikode — 673029, Kerala, India
+974 6004 4913  ·  [email protected]

Structural Engineering Services for Jeddah

  • Coastal high-rise structural design — Red Sea-facing towers with marine exposure requirements. ACI 318-19 durability provisions for Class C2 exposure: w/cm ≤ 0.40, 50+ mm cover, GGBFS supplementary binder.
  • Steel structure design — port-adjacent industrial, entertainment, and commercial steel frames. Marine corrosion protection: hot-dip galvanising or high-build epoxy + polyurethane topcoat systems.
  • Foundation design — Jeddah's varied coastal geology includes coral reef limestone, beach sand, and sabkha patches near the lagoon zones. Foundation type selection, pile design, and geotechnical interaction assessment.
  • Hajj and Umrah accommodation structures — high-occupancy residential towers and hotels serving the pilgrimage market. High live loads, egress structure design, crowd-loading provisions per ASCE 7.
  • PEB warehousing — port logistics and industrial warehouses. AISC 360/SBC-303 primary frame design with coastal corrosion protection.
  • Structural calculations and reports — SBC-301/303/304 compliant packages for Jeddah Municipality and MOMRA approvals.

Technical Distinctives of Jeddah Structural Engineering

Red Sea coastal marine exposure. Jeddah sits on the Red Sea coast with a hot, humid maritime climate. Structural concrete within ~1 km of the shoreline is subject to ACI 318-19 Exposure Class C2 conditions: high chloride ingress risk from salt-laden sea air and occasional splash/spray. Required design measures: w/cm ≤ 0.40, minimum 35 MPa concrete strength, 50-75 mm cover, supplementary cementitious materials (GGBFS at 30-40% replacement or silica fume at 7-10%), and a high-quality concrete placement and curing protocol.

Zone 1 seismic design. Jeddah has SBC-301 Zone 1 seismic designation — low to moderate hazard, slightly higher than Riyadh's Zone 0. Seismic base shear must be calculated, seismic load combinations applied to all structural elements, and minimum ductility detailing provided in reinforced concrete frames. For most Jeddah buildings, Red Sea wind exposure will still govern lateral design over seismic.

Wind design. Jeddah's basic wind speed is approximately 40 m/s per SBC-301 / ASCE 7. Tall towers on the Corniche face an unobstructed water fetch from the Red Sea, requiring careful wind exposure categorisation and potentially wind tunnel testing for supertall or irregular structures.

Structural Engineer Near You in Jeddah

We serve Jeddah clients across all districts — Al Hamra, Al Rawdah, Al Zahra, Al Corniche, Al Nahda, Obhur Al Shamaliyah, Al Khalidiyah, As Salamah, Al Balad (Old Town), North Jeddah, and the King Abdulaziz Airport zone.

Areas We Serve in Jeddah: Al Hamra · Al Rawdah · Al Zahra · Al Corniche · Al Nahda · Obhur Al Shamaliyah · Al Khalidiyah · As Salamah · Al Balad · Al Shati · North Jeddah · King Abdulaziz Airport District

Our Saudi Arabia Project Experience

See our Saudi Arabia structural consultancy page, Riyadh page, and SBC code guide.

Applicable Codes for Jeddah Structural Projects

  • SBC-301 — structural loads (Zone 1 seismic; ~40 m/s wind)
  • SBC-303 — structural steel (AISC 360-22)
  • SBC-304 — reinforced concrete (ACI 318-19)
  • IBC 2021 — building code base
  • ACI 318-19 Durability — Exposure Class C2 for coastal structures

How to Start a Jeddah Project

Email [email protected] or WhatsApp +974 6004 4913. Include: project type, site location in Jeddah (coastal or inland — affects durability spec), approximate size, and available drawings. We confirm scope, timeline, and fee within one business day.

— FREQUENTLY ASKED QUESTIONS

Common questions about
structural engineering in Jeddah

Which structural codes apply in Jeddah?

SBC-301 (loads), SBC-303 (steel/AISC 360), SBC-304 (concrete/ACI 318), IBC 2021. Zone 1 seismic. Jeddah Municipality administers approvals.

What is the seismic risk in Jeddah?

Zone 1 — low to moderate. Higher than Riyadh's Zone 0. Seismic base shear calculation required; minimum ductility detailing in RC frames. Wind from Red Sea typically governs lateral design for most buildings.

What are the marine exposure requirements for Jeddah coastal structures?

ACI 318-19 Class C2: w/cm ≤ 0.40, minimum 35 MPa, 50-75 mm cover, GGBFS or silica fume. Steel: hot-dip galvanising or multi-coat system with zinc-rich primer (250+ microns DFT).

What structural demand does the Jeddah Tower create?

The 1,000 m+ Jeddah Tower has elevated the entire city's structural engineering market — signalling the ambition level of Jeddah's tower development and making specialist international structural consultants the preferred choice for coastal high-rise projects.

Where can I find a structural consultant near me in Jeddah?

We serve all Jeddah districts remotely — Al Corniche, Al Hamra, Al Rawdah, Al Zahra, North Jeddah, Al Balad, and more. Email [email protected] or call +974 6004 4913.